electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

Brilliance BMW X1 introduce

The domestically produced Brilliance BMW X1 and the imported version X1 are almost identical. For BMW, there are no missing iconic details. The front face still features the standard dual kidney grille, coupled with the energetic triangular eyes, giving the entire front face a certain aura. The main difference between the domestically produced X1 xDrive20i and 28i on the front face is that they use a black grille while the 28i uses a chrome grille, The 28i has an additional horizontal chrome strip on the lower grille compared to the 20i. On the side of the Brilliance BMW X1, there is not much decoration, and a slightly upturned waistline gives its side a sense of power. The snowflake shaped five spoke aluminum alloy wheels add some fashionable elements to this sense of power, and the two are well integrated. On the C-pillar at the rear of the car, The classic corners of BMW are clearly visible, while the 28i has an additional silver skirt trim on the side compared to the 20i. At the rear, X1 continues to follow the rugged route of an SUV, but what reflects this ruggedness is the few simple lines. The large rear window occupies the majority of the rear. The sharp LED tail lights in the shape allow X1's body lines to continue here. The difference between the 20i and 28i at the rear is not significant, Mainly in terms of the silver trim on the rear bumper, the 28i is taller