LUK introduce

The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)

Installation method of clutch three piece set

This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type

SUBARU BRZ introduce

The Subaru BRZ was officially released in 2015, with a more sporty exterior design and equipped with 225/40 ZR18 Michelin Pilot Super Sport series tires. The chassis has been strengthened, and the power continues to be equipped with a 2.0L naturally aspirated direct injection engine. The Subaru BRZ tS STI model is currently only sold in Japan, with a limited quantity of 300 units [1] Subaru unveiled the 22 seater new two door hardtop sports car BRZ at the Frankfurt International Auto Show, which opened on September 15, 2011. The new car showcases Subaru's latest research and development achievements, as well as the new generation design concept, pointing the way for future Subaru new cars. The new BRZ is a collaborative development between Subaru and Toyota, and is a sister car of the Toyota 86 (note: the North American version is called the Scion FR-S, the European version is called the GT86, and the Japanese version is called the 86), The car adopts a horizontally opposed engine and front rear wheel drive layout. The suspension forms are front MacPherson independent suspension and rear double wishbone suspension. The wheelbase reaches 2570mm, the car is 4239mm long, 1775mm wide, and 1285mm high