Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

SUBARU BRZ introduce

The Subaru BRZ was officially released in 2015, with a more sporty exterior design and equipped with 225/40 ZR18 Michelin Pilot Super Sport series tires. The chassis has been strengthened, and the power continues to be equipped with a 2.0L naturally aspirated direct injection engine. The Subaru BRZ tS STI model is currently only sold in Japan, with a limited quantity of 300 units [1] Subaru unveiled the 22 seater new two door hardtop sports car BRZ at the Frankfurt International Auto Show, which opened on September 15, 2011. The new car showcases Subaru's latest research and development achievements, as well as the new generation design concept, pointing the way for future Subaru new cars. The new BRZ is a collaborative development between Subaru and Toyota, and is a sister car of the Toyota 86 (note: the North American version is called the Scion FR-S, the European version is called the GT86, and the Japanese version is called the 86), The car adopts a horizontally opposed engine and front rear wheel drive layout. The suspension forms are front MacPherson independent suspension and rear double wishbone suspension. The wheelbase reaches 2570mm, the car is 4239mm long, 1775mm wide, and 1285mm high