Front and rear door hinges introduce

Also known as door hinge, it is used for opening and closing doors. Hinges, also known as hinges, are mechanical devices used to connect two solids and allow relative rotation between them. Hinges can be composed of movable components or foldable materials. The main feature is to provide cushioning when the cabinet or door is closed, minimizing the noise generated by collisions with other parts when the door is closed. Car hinges are generally used in car doors and engine hood, And the trunk lid, fuel tank lid hinge, etc. In order to connect the car door to the body, the hinge is responsible for connecting the car door to the body, ensuring the opening and closing of the car door, and allowing the car door to open and close, so there is a door hinge. Its main function is to connect the car body to the car door. Generally, The door hinge should consist of at least three parts. 1. Body parts connected to the vehicle body. 2. Door parts connected to the door. 3. Other parts that connect the body parts and door parts and ensure that the door hinge can make opening and closing movements)

The installation of car doors requires the following processes:

The installation of car doors requires the following steps: 1. First, prepare the new car door that needs to be replaced and installed. Place the new car door on a paper shell to avoid scratching the new door, and prepare the necessary tools for installation, including a large wheel, a small wheel, a No. 13 sleeve, a No. 6 sleeve, and a small hammer. Then, start the operation process. 2. Install the door hinges, where a large wheel is required, Cooperate with sleeve 13. Take out the door hinge, fix the screws of the door hinge, and then make a rough comparison by hand to check whether the hole of the hinge is the same size as the screw hole of the door, and whether the screw can be screwed in exactly. Do a good job of inspection. 3. After comparing the hinge by hand, take out the large wheel and match it with sleeve 13. Gently tighten the screws that fix the hinge to the door by hand, and then use tools to tighten it. If you use tools to tighten it directly, It is easy to break the screws, which results in the entire car door being scrapped. Therefore, when tightening, be careful and slow. Pay attention to the extended part of the hinge head facing downwards, as it needs to be inserted into the card slot of the car body hinge. 4. Lift the door with the installed hinge by hand and lift it to the installation position of the car body door. There are two hinge holes on the installation position of the car body door, and the extended part of the hinge head on the new car door should be aligned up and down, Insert it into the two hinge holes on the car body. Be sure to take it slow and align the upper and lower holes before inserting it to avoid scratching the paint surface on the car body. 5. The extended part of the inserted hinge may get stuck halfway through the holes, which is a common problem, but it is also easy to solve. Take out the hammer and smash the hinge on the car door twice with the hammer, and the extended part will enter the car body hole. 6. Next, remove the screw that fixes the car body hinge, There is a screw hole in the middle part of the body hinge hole, which is used to fix the body hinge and door hinge. First, gently screw in a part by hand to avoid damaging the screw directly with tools. The screw on the door should be fixed with extra care. 7. Take out the small wheel, long extension rod, and No. 6 sleeve, and tighten the screw that has been screwed in by hand with tools. There are a total of two screws, up and down, which are also completed according to the above procedure. It should be noted that:, Be sure to steadily and tentatively tighten the screws bit by bit in order to complete the task smoothly

Fiat CROMA introduce

The new Croma station wagon has a more dynamic and modern exterior design, although only modified from the current model, the effect is indeed immediate. The new car incorporates the design elements of the new generation Fiat, and we can see the shadow of the new Punto and Brava. The engine hood of the new car has clear lines and a strong sense of power. The elongated front headlights are very dynamic, and the horizontal grille has been replaced by a chrome plated mesh. The tail light shade is darker and cooler than the old model, and the new design of the rear bumper is more dynamic. The cabin of the new car has also been decorated, full of Italian style luxury. The seats are made of leather and fabric. The newly designed instrument panel and steering wheel are very elegant. The standard configuration of the new Croma is already very rich, including rain sensors, reverse radar, tire pressure sensors, cruise control system, ABS anti lock braking system, EBD brake force distribution system, ESP body stability control system, front dual airbags, side airbags, air curtains, and knee airbags. In addition, the new car also has a large number of optional configurations, Including DVD audio and video system, navigation and information system with Bluetooth function, high fidelity audio system, etc. The second row seats can be fully folded, and when the passenger seat is folded down, it becomes a small coffee table. The cargo space can be conveniently increased from 500 liters to 1610 liters. Fiat provides five engines for users to choose from for the new Croma, including two gasoline engines and three Multijet turbocharged diesel engines. The entry-level power is a 1.8-liter gasoline engine with a 140 hp output, and the top-level power configuration is a 2.4-liter turbocharged diesel engine with a 200 hp output. The diesel engine comes standard with a six speed automatic transmission, while the gasoline engine comes standard with a five speed manual transmission. 2.2 A gasoline engine can be equipped with a six speed automatic transmission, while a 1.9-liter diesel engine can be equipped with a five speed manual transmission (Kevin Lee)