Rear wheel fender introduce

The leaf plate includes: front leaf plate, front leaf plate lining, front leaf plate light, rear leaf plate light, radiator frame. The leaf plate refers to a type of cover on motor vehicles and non motor vehicles (a slightly protruding, semi-circular small piece above the wheel), and the cover, as the name suggests, is the shell that covers the outside of motor vehicles and non motor vehicles. It conforms to fluid mechanics and reduces the wind resistance coefficient, Make the car run more smoothly. The fender, also known as the fender, is located outside the body of the wheels. Its function is to reduce the drag coefficient of the fender air outlet according to fluid dynamics, making the car run more smoothly. According to the installation position, it is divided into front fender and rear fender. The front fender is installed above the front wheel, because the front wheel has steering function, it is necessary to ensure the maximum limit space when the front wheel rotates, Therefore, designers will use a "wheel runout chart" to verify the design dimensions of the fender based on the selected tire model size. The rear fender does not have the problem of wheel rotation collision, but due to aerodynamic considerations, the rear fender slightly arches outward. Secondly, the front fender can prevent sand, stones, and mud rolled up by the wheels from splashing onto the bottom of the car during driving, reducing damage and corrosion to the chassis, The materials used are required to have weather aging resistance and good formability. Currently, many car front fenders are made of plastic materials with a certain degree of elasticity, making them more cushioning and safer)

Installation method of rear fender/rear fender assembly

1. Start the car and turn all wheels to the right, then turn off the engine and remove the car key. Then open the engine hood and disconnect the negative pole of the battery. Use a Phillips screwdriver to remove the four screws on the front bumper. Use a 5mm hex wrench to remove the two screws on the side of the front bumper; 2. Use a Phillips screwdriver and a 7mm socket to remove the three screws under the right side of the front bumper fascia. Use a Phillips screwdriver and a 7mm socket to remove the three screws of the fender. Remove the splash guard; 3. Use a small ratchet wrench, extension rod, and 7mm socket to remove the screws at the bottom of the front bumper. Use a square screwdriver and 7mm socket to remove the screws connecting the fender and bumper. Use a large ratchet wrench and 10mm socket to remove the four bolts behind the front headlight; 4. Remove the plug of the front headlight assembly. Remove the front headlight assembly. Remove the screws connecting the splash guard to the fender, and the fender can be removed; 5. The fender is located outside the vehicle body of the wheels. Its function is to reduce the drag coefficient based on fluid dynamics, making the vehicle travel smoother. It is further divided into front fender and rear fender according to the installation position, with the front fender installed above the front wheel; 6. Due to the steering function of the front wheels, it is necessary to ensure the maximum limit space when the front wheels rotate. Therefore, the designer will use the "wheel runout diagram" based on the selected tire model size to verify the design size of the fender

Fiat CROMA introduce

The new Croma station wagon has a more dynamic and modern exterior design, although only modified from the current model, the effect is indeed immediate. The new car incorporates the design elements of the new generation Fiat, and we can see the shadow of the new Punto and Brava. The engine hood of the new car has clear lines and a strong sense of power. The elongated front headlights are very dynamic, and the horizontal grille has been replaced by a chrome plated mesh. The tail light shade is darker and cooler than the old model, and the new design of the rear bumper is more dynamic. The cabin of the new car has also been decorated, full of Italian style luxury. The seats are made of leather and fabric. The newly designed instrument panel and steering wheel are very elegant. The standard configuration of the new Croma is already very rich, including rain sensors, reverse radar, tire pressure sensors, cruise control system, ABS anti lock braking system, EBD brake force distribution system, ESP body stability control system, front dual airbags, side airbags, air curtains, and knee airbags. In addition, the new car also has a large number of optional configurations, Including DVD audio and video system, navigation and information system with Bluetooth function, high fidelity audio system, etc. The second row seats can be fully folded, and when the passenger seat is folded down, it becomes a small coffee table. The cargo space can be conveniently increased from 500 liters to 1610 liters. Fiat provides five engines for users to choose from for the new Croma, including two gasoline engines and three Multijet turbocharged diesel engines. The entry-level power is a 1.8-liter gasoline engine with a 140 hp output, and the top-level power configuration is a 2.4-liter turbocharged diesel engine with a 200 hp output. The diesel engine comes standard with a six speed automatic transmission, while the gasoline engine comes standard with a five speed manual transmission. 2.2 A gasoline engine can be equipped with a six speed automatic transmission, while a 1.9-liter diesel engine can be equipped with a five speed manual transmission (Kevin Lee)