The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The super practical storage space of Beijing Automotive Beijing-U7 (formerly known as Beijing Automotive Zhidao U7) has reduced a lot of trouble for travel. The most pleasing aspect of the front storage space is its central armrest box. The two-piece design supports left and right split opening. This design is generally only found in high-end models of Mercedes Benz and BMW, and it is not easy to make the armrest box so innovative at this price point, The space design of this central armrest box is also excellent, with a large depth and strong practicality. In addition, there are two central cup holders in front of the central armrest box, which are just right for storing mineral water. The largest storage compartment in the central control area is located in the area in front of the gear lever, and there are also two USB ports and a 12V power supply. In addition, there is a small storage compartment on the left side of the driver's side, It can be used to store change, bills, and other miscellaneous items. The storage space inside the front glove box and door panel is also large, and the interior of the glove box is treated with flocking, so it is not afraid of scratching valuable items
Copyright © 2021.Company name All rights reserved.