fog lamp introduce

The following is an introduction to the functions of car front fog lights: 1. Let other vehicles see the car in foggy or rainy weather conditions where visibility is greatly affected by weather. 2. Install in the front of the car slightly lower than the headlights, used to illuminate the road when driving in rainy and foggy weather. 3. It can improve the visibility of the driver and surrounding traffic participants, To enable oncoming vehicles and pedestrians to detect each other from a distance, the following are the operation methods for activating the front and rear fog lights: 1. Joystick on type: Start the fog lights by rotating the switch on the joystick. When the button marked with the fog light signal is turned to the ON position, the front fog lights will turn on, and then turn the button down to the rear fog light position, that is, turn on the front and rear fog lights at the same time. 2. Button on type: Start the front and rear fog lights by pressing the button, and mark the fog light button near the dashboard or center console, Press the front and rear fog light buttons separately to turn on the front and rear fog lights)

Installation method of front fog lights/rear fog lights/LED fog lights/warning lights

1. First, remove the black outer shell of the vehicle fog light, pull out the wiring harness inside, remove the snake head, and leave the plug. 2. Remove the lining near the fog light inside the wheel hub, which can be pried open with a screwdriver or other tools for convenient installation of the fog light later. 3. Install the newly purchased fog light at the wiring harness plug that was just found, fix it with a screwdriver or other tools, and then install it at the dug circular hole, fix it, and finally restore the removed lining

Honda CR-Z introduce

The interior design of the CR-Z continues the high-tech and dynamic design style, with the most prominent feature being a very futuristic instrument panel. The CR-Z's gauge cluster can emit three different colors of light according to different driving modes. The interior design of this CR-Z is very light and spacious, using many mesh like materials The front face of the CR-Z is prominent and full, with a sporty and conceptual feel, which is somewhat similar to the Audi R8. The tail lights are sharp triangles, with three rows of LED lights distributed parallel, showcasing a sporty style. The rear bumper of the Honda CR-Z is very wide, integrated with the rear fender. Below the rear bumper is a black diffuser decorative strip, which is also a standard sports car configuration