Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The interior design of the CR-Z continues the high-tech and dynamic design style, with the most prominent feature being a very futuristic instrument panel. The CR-Z's gauge cluster can emit three different colors of light according to different driving modes. The interior design of this CR-Z is very light and spacious, using many mesh like materials The front face of the CR-Z is prominent and full, with a sporty and conceptual feel, which is somewhat similar to the Audi R8. The tail lights are sharp triangles, with three rows of LED lights distributed parallel, showcasing a sporty style. The rear bumper of the Honda CR-Z is very wide, integrated with the rear fender. Below the rear bumper is a black diffuser decorative strip, which is also a standard sports car configuration
Copyright © 2021.Company name All rights reserved.