Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Roewe RX5 introduce

The Roewe RX5, an internet SUV launched by SAIC Roewe in 2016, adopts "Blue Core" high-efficiency power technology and is equipped with two 2.0T and 1.5T inline direct injection turbocharged engines. Specifically, the 2.0T engine has a maximum power of 220 horsepower, a peak torque of 350 Nm, and a minimum combined fuel consumption of 8.1L per 100 kilometers; The 1.5T engine has a maximum power of 169 horsepower, peak torque of 250 Newton meters, and a comprehensive fuel consumption of only 6.8L per 100 kilometers. In addition, the Roewe RX5 adopts Porsche chassis tuning, GKN intelligent real-time four-wheel drive system, fully independent suspension system, and all four high-speed CANBUS system bus, which are homologous to Land Rover, to comprehensively improve driving and riding quality