The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Roewe RX5, an internet SUV launched by SAIC Roewe in 2016, adopts "Blue Core" high-efficiency power technology and is equipped with two 2.0T and 1.5T inline direct injection turbocharged engines. Specifically, the 2.0T engine has a maximum power of 220 horsepower, a peak torque of 350 Nm, and a minimum combined fuel consumption of 8.1L per 100 kilometers; The 1.5T engine has a maximum power of 169 horsepower, peak torque of 250 Newton meters, and a comprehensive fuel consumption of only 6.8L per 100 kilometers. In addition, the Roewe RX5 adopts Porsche chassis tuning, GKN intelligent real-time four-wheel drive system, fully independent suspension system, and all four high-speed CANBUS system bus, which are homologous to Land Rover, to comprehensively improve driving and riding quality
Copyright © 2021.Company name All rights reserved.