The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
On October 18, 2013, Lifan Automobile held the launch ceremony of Lifan 630 in Lhasa, Xizang. Lifan 630 is an upgraded version of Lifan 620. It is also positioned as a compact car, but its positioning is higher than Lifan 530. The new car also has obvious changes, especially in the front. The new car uses the "X" type front grille, which is more sporty and has the feeling of Lexus' latest family style. The headlight angle rises, and the sense of hierarchy is clear. In terms of interior decoration, the new car also has some adjustments in the appearance of the dashboard and the center console
Copyright © 2021.Company name All rights reserved.