Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Cadillac CT5 introduce

The Cadillac CT5 was officially released at the 2019 New York Auto Show and was launched in overseas markets in August; In terms of appearance, the CT5 also follows Cadillac's latest exterior design, which is divided into two styles: the sports version and the fashion version, with a sleek design. The Cadillac CT5 adopts an electronic gear lever, and the control knob of the multimedia system is located behind the gear lever. In terms of power, the Cadillac CT5 is equipped with a 2.0T turbocharged engine and a 3.0T twin turbocharged engine. The transmission part is matched with a 10AT gearbox, and high-end models will also provide a four-wheel drive system