What is a three-way catalytic converter? A three-way catalytic converter is the most important external purification device installed in a car's exhaust system, which can remove CO from the car's exhaust Harmful gases such as HC and NOx are converted into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Simply put, they purify the exhaust gas. The working principle of a three-way catalytic converter is as follows: 1. When the engine exhaust gas is discharged through the exhaust pipe, due to the catalytic effect of the purifying agent in the three-way catalytic converter, the activity of C0, HC, and NOx is enhanced, leading to oxidation and reduction reactions. 2. C0 is oxidized to colorless and non-toxic C02 at high temperatures, HC compounds are oxidized to H20 and C02 at high temperatures, while NOx is reduced to N2 (nitrogen) and 02 (oxygen), thereby purifying the engine's exhaust emissions)
Method for installing a three-way catalytic converter: ① Use 8 bolts to install 2 heat shields on the new preheated three-way catalytic converter. ② Install the new gasket, protective ring, and sealing gasket onto the preheated three-way catalytic converter. ③ Use 3 bolts and 2 new nuts to install the preheated three-way catalytic converter with a tightening torque of 29N. m. ④ Use bolts and nuts to install the exhaust manifold bracket with a tightening torque of 42N. m. ⑤ Use bolts and nuts to install the No.1 exhaust manifold bracket with a tightening torque of 42N. m. ⑥ Connect the secondary oxygen sensor connector
The Leopard CT7 is a new pickup truck for Leopard cars. The Leopard CT7 comes in two models: standard double row and large double row, with a standard double row body size of 5310 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3105mm; The body size of the large double row model is 5585 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3380mm. The new car has a rugged appearance and is mainly equipped with practical interior features. The vehicle is equipped with a 1.9T diesel engine, with a maximum power of 136 horsepower and a peak torque of 300 Nm, matched with a 5-speed manual transmission. The body structure is non load bearing, with two wheel drive and four-wheel drive modes. The new car was officially launched on January 12, 2017, equipped with a 1.9T diesel engine and comes in five models: dual row/large dual row, two wheel drive/four-wheel drive
Copyright © 2021.Company name All rights reserved.