Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The BMW 520i is a mid to large-sized sedan produced by BMW. As the lowest configuration of the imported BMW 5 Series, the 520i adopts a lighter body, but the body size has not changed. To match this model, it is a 2.2-liter naturally aspirated L6 cylinder engine with a maximum power output of 170 horsepower and a peak torque of 210 Nm, with a compression ratio of up to 10.8. It can accelerate from 0 to 100 kilometers in just 9.9 seconds and a top speed of 226 kilometers per hour
Copyright © 2021.Company name All rights reserved.