The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The exterior design of the Ouliwei comes from Changan Automobile's European and Italian designers. In terms of styling, it has long been the foundation of the concept car, which was the VOSS concept car. However, the difference between the mass-produced version and the concept car is very large. Except for a slight inheritance of the cabin part, the design elements on the concept car are rarely preserved. The front grille is similar to the Acura, and the headlight contour is large, with only the sunken waistline design on the side being preserved, And it is this waistline style that connects the Olivier with the VOSS concept car
Copyright © 2021.Company name All rights reserved.