Luggage compartment lid introduce

The luggage compartment lid requires good rigidity and is structurally similar to the engine hood, with both outer and inner panels and reinforced ribs on the inner panel. Some sedans, known as "two and a half", have their luggage compartment extending upwards, including the rear windshield, to increase the opening area and form a door. Therefore, it is also called a back door, which maintains the shape of a sedan and facilitates the storage of items. If a back door is used, the side of the inner panel of the back door should be embedded with rafter adhesive sealing strips, Surrounded by a circle to prevent water and dust, the support components for opening the luggage compartment lid are generally hook shaped hinges and four link hinges. The hinges are equipped with balance springs, which make opening and closing the luggage compartment lid effortless and can be automatically fixed in the open position for easy retrieval of items)

Installation and replacement process of luggage compartment lid/trunk lid

An assistant is required when disassembling and installing the luggage compartment lid. Wear gloves to protect your hands and prevent injury. 1) Separate the luggage compartment lid decorative panel fixture and remove the luggage compartment lid decorative panel. 2) Separate the luggage compartment rear wire and connector. 3) Unscrew the luggage compartment lid hinge fixing bolt and remove the luggage compartment lid. 4) Install a new luggage compartment lid in the opposite order of disassembly

Riich M3 introduce

The design of the Ruiqi M3 is a scaled down version of the Ruiqi M1, which is very similar to the Ruiqi M1 and Ruiqi M5 in terms of appearance. However, the black grille on the front face is larger and the design is more simple. The oval shaped headlights replace the peanut shaped headlights on the M1 body. According to data, the body length of the Ruiqi M3 is 3290mm, which is 32cm shorter than the length of the M1 3610mm;