crossmember introduce

Yuanbaoliang, the concept of "subframe", is a new term often used in car books. This component is not only found in Volkswagen cars, but also in other car models. The subframe is not a complete frame, but only a bracket that supports the front and rear axles and suspension, connecting the axles and suspension to the "main frame" through it, commonly known as the "subframe". The function of the subframe is to block vibration and noise, reduce their direct entry into the car compartment, so it is mostly found in luxury sedans and off-road vehicles. Some cars even install subframes for engines)

Yuanbaoliang/subframe installation

1: Two horns of the gearbox: 2. Return oil pipe and oil pipe of the steering gear. 3. Half shaft and balance rod. Direction rod. 4. Connection of the steering intermediate shaft to the steering gear. 5. Installation of four fixing screws for the Yuanbao beam. 1. Fixation of four screws and intermediate shaft. 2. Two oil pipes. 3. Horn, half shafts and pull rods on both sides

Riich M3 introduce

The design of the Ruiqi M3 is a scaled down version of the Ruiqi M1, which is very similar to the Ruiqi M1 and Ruiqi M5 in terms of appearance. However, the black grille on the front face is larger and the design is more simple. The oval shaped headlights replace the peanut shaped headlights on the M1 body. According to data, the body length of the Ruiqi M3 is 3290mm, which is 32cm shorter than the length of the M1 3610mm;