The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
The design of the Ruiqi M3 is a scaled down version of the Ruiqi M1, which is very similar to the Ruiqi M1 and Ruiqi M5 in terms of appearance. However, the black grille on the front face is larger and the design is more simple. The oval shaped headlights replace the peanut shaped headlights on the M1 body. According to data, the body length of the Ruiqi M3 is 3290mm, which is 32cm shorter than the length of the M1 3610mm;
Copyright © 2021.Company name All rights reserved.