The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
The Huanghai Xiaochai Shen carriage is generally equipped with anti glare reverse mirrors, which are composed of a special mirror, two photodiodes, and an electronic controller. The Huanghai Xiaochai Shen electronic controller receives front and rear light signals sent by the photodiodes. After closing the switch at the speed required by the driver, it automatically maintains the speed without stepping on the accelerator pedal, allowing the vehicle to travel at a fixed speed. This device is used, After driving for a long time on the highway, the Yellow Sea Little Chai God no longer needs to control the accelerator pedal, reducing fatigue and unnecessary speed changes, which can save fuel
Copyright © 2021.Company name All rights reserved.