ABS, translated as "anti lock braking system" in Chinese, is one of the three great inventions in the history of automotive safety, along with airbags and seat belts. It is a car safety control system with advantages such as anti slip and anti lock ABS is an improved technology based on conventional braking devices, which can be divided into mechanical and electronic types. Modern cars are extensively equipped with anti lock braking systems. ABS not only has the braking function of ordinary braking systems, but also prevents wheel lock up, allowing the car to still turn in the braking state, ensuring the stability of the car's braking direction, and preventing sideslip and deviation. It is currently the most advanced and most effective braking device in cars)
1. First, disconnect the negative wire harness. 2. Then pull up the locking pin of the ABS pump plug, and separate the plug. 3. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 4 brake lines from the ABS pump. 4. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 2 brake lines below from the ABS pump. 5. Separate the two plugs above the engine compartment. 6. Use a tool to remove the fixing screw of the ABS pump bracket
The basic structure of the Z4 suspension system comes from the BMW new 3 series, and some structural improvements have been made to make it more dynamic to operate than the previous suspension. The BMW Z4 is a focus coupe under the BMW brand, and its design is improved on the basis of the Z3. The long engine hood and very comfortable seats almost fall on the rear axle are very close to the back. The upward sloping tail of the new car is more attractive, coupled with clear concave and convex lines on both sides, Make the new car look more imposing than the Z3. These eye-catching lines are combined with first-class sports car performance: long wheelbase, short overhang, wide wheelbase, and a relatively low center of gravity
Copyright © 2021.Company name All rights reserved.