steering pump introduce

The electronic hydraulic power steering system of the steering pump overcomes the shortcomings of traditional hydraulic power steering systems. During low-speed and large turns, the electronic control unit drives the electronic hydraulic pump to output a large power at high speed, making it easier for the driver to turn the steering wheel. The function of the steering pump is to assist the driver in adjusting the direction of the car, reducing the force required to turn the steering wheel. By adjusting the speed of the steering oil flow, it helps the driver to turn the steering wheel more easily, reduces the force required to turn the steering wheel, and reduces driving fatigue. The steering pump is the power source for the car's steering and is the heart of the steering system. The function of the power pump is: 1. It can help the driver turn the steering wheel well, hydraulic power steering wheel. The electronic power steering wheel only uses one power pump. A car without a booster pump can rotate with just one finger, while a car without a booster pump requires two hands to rotate; 2. Therefore, the power pump is set to reduce driving fatigue. It drives the steering gear to work. Nowadays, it is all intelligent power assistance, and the steering wheel is light when the car is parked in place, but heavy in the middle of driving; 3. It is a set of gear mechanisms that complete the transition from rotary motion to linear motion, and is also a deceleration transmission device in the steering system. It mainly includes blade, gear type, plunger blade, gear type, etc. Its main function is to assist the driver in adjusting the direction of the car, reducing the force required to turn the steering wheel. By adjusting the speed of steering oil flow, it provides assistance and makes it easier for the driver to turn the direction. In simple terms, its function is to make the steering wheel lighter while driving, reduce the force required to turn the steering wheel, and reduce driving fatigue)

BAIC 212 introduce

BAIC 212 Series: Founded in 1958, Beijing Automotive Manufacturing Co., Ltd. is a representative of BAIC's independent brand. For more than 40 years, BAIC has focused on the development and production of light off-road vehicles and trucks, and has won the reputation of "off-road family". The BAIC BJ-212 was first developed in 1964, and in 1965, the BJ-212 series off-road vehicles were officially finalized. The BJ-212 at that time adopted a detachable soft top design, The BJ-212 Jeep is mainly used for commander riding, weapon transportation, and other purposes. It adopts front and rear steel plate spring non independent suspension, which has strong off-road capabilities. It finally achieved mass production in 1966. In terms of body size, its length, width, and height are 3910mm, 1760mm, and 1880mm respectively, with a wheelbase of 2310mm. In terms of power, the BJ-212 Jeep is equipped with a 2445cc inline four cylinder gasoline engine, which adopts four-wheel drive and front and rear drum brakes, Matched with the engine is a 3-speed manual transmission, which has a maximum power of 75 horsepower, a maximum torque of 172 Nm, a weight of 1395kg, a maximum speed of 120-130 km/h, and a fuel consumption of approximately 14L per 100 kilometers