With the development of gasoline engines in automobiles towards high speed, high compression ratio, high power, low fuel consumption, and low emissions, traditional ignition devices are no longer suitable for use. The core components of ignition devices are ignition coils and switch devices. By increasing the energy of the ignition coils, the spark plug can generate sufficient energy to produce sparks, This is the basic condition for the ignition device to adapt to the operation of modern engines. The ignition coil is divided into two types according to the magnetic circuit: open magnetic and closed magnetic. The traditional ignition coil is used with an open magnetic type, and its iron core is stacked with about 0.3 millimeters of silicon steel, with secondary and primary coils wound around the iron core. The closed magnetic type uses an iron core similar to III to wrap around the primary coil, and then wraps around the secondary coil outside. The magnetic field line is composed of an iron core to form a closed magnetic circuit. The advantage of the closed magnetic ignition coil is that it has less magnetic leakage, Due to its small energy loss and volume, electronic ignition systems generally use closed field ignition coils)
BAIC 212 Series: Founded in 1958, Beijing Automotive Manufacturing Co., Ltd. is a representative of BAIC's independent brand. For more than 40 years, BAIC has focused on the development and production of light off-road vehicles and trucks, and has won the reputation of "off-road family". The BAIC BJ-212 was first developed in 1964, and in 1965, the BJ-212 series off-road vehicles were officially finalized. The BJ-212 at that time adopted a detachable soft top design, The BJ-212 Jeep is mainly used for commander riding, weapon transportation, and other purposes. It adopts front and rear steel plate spring non independent suspension, which has strong off-road capabilities. It finally achieved mass production in 1966. In terms of body size, its length, width, and height are 3910mm, 1760mm, and 1880mm respectively, with a wheelbase of 2310mm. In terms of power, the BJ-212 Jeep is equipped with a 2445cc inline four cylinder gasoline engine, which adopts four-wheel drive and front and rear drum brakes, Matched with the engine is a 3-speed manual transmission, which has a maximum power of 75 horsepower, a maximum torque of 172 Nm, a weight of 1395kg, a maximum speed of 120-130 km/h, and a fuel consumption of approximately 14L per 100 kilometers
Copyright © 2021.Company name All rights reserved.