Airbag computer introduce

The function of the airbag computer is to receive signals from collision sensors and other sensors, and determine whether the airbag has ignited and expanded. It can also self diagnose system faults. The airbag computer components mainly include collision sensors EEPROMM storage chip, burst tube drive integrated circuit, and microprocessor. At the same time, when the car airbag computer malfunctions, the status information and fault code in its computer memory can be called out by special instruments or through specific means from the serial communication interface for testing and detection. Helping the automotive parts platform to provide ordering services for original car accessories of airbag computers for various vehicle models)

Location of airbag computer board

The airbag computer board is usually located in front of or under the gear lever. The area with an AIR BAG on the car is the airbag. Use a computer to enter the airbag system to detect faults, and then repair them according to the meaning of the fault. If there are no faults, the computer can directly clear the fault

BAIC 212 introduce

BAIC 212 Series: Founded in 1958, Beijing Automotive Manufacturing Co., Ltd. is a representative of BAIC's independent brand. For more than 40 years, BAIC has focused on the development and production of light off-road vehicles and trucks, and has won the reputation of "off-road family". The BAIC BJ-212 was first developed in 1964, and in 1965, the BJ-212 series off-road vehicles were officially finalized. The BJ-212 at that time adopted a detachable soft top design, The BJ-212 Jeep is mainly used for commander riding, weapon transportation, and other purposes. It adopts front and rear steel plate spring non independent suspension, which has strong off-road capabilities. It finally achieved mass production in 1966. In terms of body size, its length, width, and height are 3910mm, 1760mm, and 1880mm respectively, with a wheelbase of 2310mm. In terms of power, the BJ-212 Jeep is equipped with a 2445cc inline four cylinder gasoline engine, which adopts four-wheel drive and front and rear drum brakes, Matched with the engine is a 3-speed manual transmission, which has a maximum power of 75 horsepower, a maximum torque of 172 Nm, a weight of 1395kg, a maximum speed of 120-130 km/h, and a fuel consumption of approximately 14L per 100 kilometers