crossmember introduce

Yuanbaoliang, the concept of "subframe", is a new term often used in car books. This component is not only found in Volkswagen cars, but also in other car models. The subframe is not a complete frame, but only a bracket that supports the front and rear axles and suspension, connecting the axles and suspension to the "main frame" through it, commonly known as the "subframe". The function of the subframe is to block vibration and noise, reduce their direct entry into the car compartment, so it is mostly found in luxury sedans and off-road vehicles. Some cars even install subframes for engines)

Yuanbaoliang/subframe installation

1: Two horns of the gearbox: 2. Return oil pipe and oil pipe of the steering gear. 3. Half shaft and balance rod. Direction rod. 4. Connection of the steering intermediate shaft to the steering gear. 5. Installation of four fixing screws for the Yuanbao beam. 1. Fixation of four screws and intermediate shaft. 2. Two oil pipes. 3. Horn, half shafts and pull rods on both sides

BAIC 212 introduce

BAIC 212 Series: Founded in 1958, Beijing Automotive Manufacturing Co., Ltd. is a representative of BAIC's independent brand. For more than 40 years, BAIC has focused on the development and production of light off-road vehicles and trucks, and has won the reputation of "off-road family". The BAIC BJ-212 was first developed in 1964, and in 1965, the BJ-212 series off-road vehicles were officially finalized. The BJ-212 at that time adopted a detachable soft top design, The BJ-212 Jeep is mainly used for commander riding, weapon transportation, and other purposes. It adopts front and rear steel plate spring non independent suspension, which has strong off-road capabilities. It finally achieved mass production in 1966. In terms of body size, its length, width, and height are 3910mm, 1760mm, and 1880mm respectively, with a wheelbase of 2310mm. In terms of power, the BJ-212 Jeep is equipped with a 2445cc inline four cylinder gasoline engine, which adopts four-wheel drive and front and rear drum brakes, Matched with the engine is a 3-speed manual transmission, which has a maximum power of 75 horsepower, a maximum torque of 172 Nm, a weight of 1395kg, a maximum speed of 120-130 km/h, and a fuel consumption of approximately 14L per 100 kilometers