In fact, everyone knows about indoor mirrors. In order to see the environment and road conditions around the car, indoor mirrors can also reduce blind spots and make drivers safer, as well as reduce the occurrence of accidents. However, many people do not know how to use indoor mirrors correctly, so blind spots increase when driving, making it unsafe to drive on the road. Although reversing mirrors on both sides are important, But you should know that car interior mirrors are also very important for drivers, and when used well, they can save your life in some unexpected situations)
Method for replacing car rearview mirror lenses: 1. Press the head of the lens by hand to lift the tail, then grab the tail with your hand and pull it out forcefully to remove the old lens; 2. There is a mark on the black plastic holder on the back of the lens, with the left driver's seat lens bearing the letter L and the right passenger's seat lens bearing the letter R; 3. Use pointed pliers to peel off the remaining exposed metal wire on the rearview mirror, then screw it separately with the copper wire at one end of the heating wire head and wrap it with insulating tape; 4. Manually connect the metal clip on one end of the heating wire, and connect it to the clip above the black plastic clip on the back of the lens. Place the connected lens into the rearview mirror housing, adjust the position, and press firmly. When you hear two clicking sounds, it indicates that all the clips on the lens have been securely installed; 5. Start the car and adjust the rearview mirror to its usual fixed position
BAIC 212 Series: Founded in 1958, Beijing Automotive Manufacturing Co., Ltd. is a representative of BAIC's independent brand. For more than 40 years, BAIC has focused on the development and production of light off-road vehicles and trucks, and has won the reputation of "off-road family". The BAIC BJ-212 was first developed in 1964, and in 1965, the BJ-212 series off-road vehicles were officially finalized. The BJ-212 at that time adopted a detachable soft top design, The BJ-212 Jeep is mainly used for commander riding, weapon transportation, and other purposes. It adopts front and rear steel plate spring non independent suspension, which has strong off-road capabilities. It finally achieved mass production in 1966. In terms of body size, its length, width, and height are 3910mm, 1760mm, and 1880mm respectively, with a wheelbase of 2310mm. In terms of power, the BJ-212 Jeep is equipped with a 2445cc inline four cylinder gasoline engine, which adopts four-wheel drive and front and rear drum brakes, Matched with the engine is a 3-speed manual transmission, which has a maximum power of 75 horsepower, a maximum torque of 172 Nm, a weight of 1395kg, a maximum speed of 120-130 km/h, and a fuel consumption of approximately 14L per 100 kilometers
Copyright © 2021.Company name All rights reserved.