Rear bumper leather introduce

The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)

The method for replacing the rear bumper is:

The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light

BAIC 212 introduce

BAIC 212 Series: Founded in 1958, Beijing Automotive Manufacturing Co., Ltd. is a representative of BAIC's independent brand. For more than 40 years, BAIC has focused on the development and production of light off-road vehicles and trucks, and has won the reputation of "off-road family". The BAIC BJ-212 was first developed in 1964, and in 1965, the BJ-212 series off-road vehicles were officially finalized. The BJ-212 at that time adopted a detachable soft top design, The BJ-212 Jeep is mainly used for commander riding, weapon transportation, and other purposes. It adopts front and rear steel plate spring non independent suspension, which has strong off-road capabilities. It finally achieved mass production in 1966. In terms of body size, its length, width, and height are 3910mm, 1760mm, and 1880mm respectively, with a wheelbase of 2310mm. In terms of power, the BJ-212 Jeep is equipped with a 2445cc inline four cylinder gasoline engine, which adopts four-wheel drive and front and rear drum brakes, Matched with the engine is a 3-speed manual transmission, which has a maximum power of 75 horsepower, a maximum torque of 172 Nm, a weight of 1395kg, a maximum speed of 120-130 km/h, and a fuel consumption of approximately 14L per 100 kilometers