The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
The Ford Crown Victoria - this full-size Ford sedan, along with its sister model Marquis Mercury, is the last representative of disappearing American automotive treasures: a non load bearing body with a wide body. The conservative design of the rear axle is popular among older customers, taxi drivers, and police officers. The Victoria Crown is equipped with Ford's standard 8-cylinder engine with overhead camshafts, The displacement is 4.6 liters and there are two power levels. As a representative of American automotive culture, the Ford Victoria Crown, which has been in production for 32 years, was officially discontinued on August 31, 2011
Copyright © 2021.Company name All rights reserved.