The car engine computer is the core part of electronic controlled cars nowadays, and its functions can be simply put as two: 1. receiving signals from various sensors and calculating corresponding data; 2. Control the fuel injection, ignition, and idle intake of the car engine based on the calculated data to ensure the normal operation of the engine and minimize engine emission pollution. 3. If the engine computer board is damaged, the following situations may occur: 1. The engine malfunction light is on, but then catches fire and the vehicle shakes; 2. The car is difficult to start, with no ignition or fuel injection, and internal program disorder. There are many symptoms of the engine computer board being broken, with minor ones being the engine malfunction light coming on and then catching fire. The vehicle shakes, making it difficult to start. In severe cases, the vehicle may be unable to start, with no ignition or fuel injection, and internal program disorder)
1. Use a T20 screwdriver to disassemble the screen and a 10mm hexagonal socket to disassemble the brake light. 2. Use a plastic pry bar to disassemble the panel, pry the pry bar firmly to loosen it, and unscrew the four screws of the host using t20. 3. Use t20 to unscrew the four screws around the host and pull them out, connecting three wires to the back. 4. Use a 10mm socket to disassemble three reversing lights, and the power of the rear camera is also connected to the black negative wire and the white green positive wire of this light
In terms of appearance, although this car is a pure electric box truck, its appearance tends to be designed in the style of a concept car. Because it does not need to collide with the wind and dissipate heat like an oil burning motor vehicle, the front face of the car only uses a banner style black paint decorative panel, which is integrated with daytime running lights, making the entire truck look full of texture. Although the rear end is relatively square, the rich line design gives the rear end a certain sense of hierarchy, The rectangular tail lights with a vertical bar style are also very stylish, and the lighting effect is stunning. According to the vehicle positioning, the Weiwang 407EV can not only enter through the rear door in crowded streets, but also through the sliding door on the right side. The tail door adopts a 4/6 ratio split design, making it more convenient and flexible to get off and transport goods. The entire trunk volume of the car is 4.5 cubic meters, and the load capacity can reach 810kg
Copyright © 2021.Company name All rights reserved.