twc introduce

What is a three-way catalytic converter? A three-way catalytic converter is the most important external purification device installed in a car's exhaust system, which can remove CO from the car's exhaust Harmful gases such as HC and NOx are converted into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Simply put, they purify the exhaust gas. The working principle of a three-way catalytic converter is as follows: 1. When the engine exhaust gas is discharged through the exhaust pipe, due to the catalytic effect of the purifying agent in the three-way catalytic converter, the activity of C0, HC, and NOx is enhanced, leading to oxidation and reduction reactions. 2. C0 is oxidized to colorless and non-toxic C02 at high temperatures, HC compounds are oxidized to H20 and C02 at high temperatures, while NOx is reduced to N2 (nitrogen) and 02 (oxygen), thereby purifying the engine's exhaust emissions)

Method for installing a three-way catalytic converter

Method for installing a three-way catalytic converter: ① Use 8 bolts to install 2 heat shields on the new preheated three-way catalytic converter. ② Install the new gasket, protective ring, and sealing gasket onto the preheated three-way catalytic converter. ③ Use 3 bolts and 2 new nuts to install the preheated three-way catalytic converter with a tightening torque of 29N. m. ④ Use bolts and nuts to install the exhaust manifold bracket with a tightening torque of 42N. m. ⑤ Use bolts and nuts to install the No.1 exhaust manifold bracket with a tightening torque of 42N. m. ⑥ Connect the secondary oxygen sensor connector

BYD E6 New Energy introduce

The BYD E6 is a pure electric crossover independently developed by BYD, which is compatible with the design concepts of SUVs and MPVs. It is a high-performance crossover vehicle. Its driving range exceeds 300km, making it the top of its class. The biggest highlight of the E6 is its electric drive, and its power and starting batteries are both produced using independently developed ET-POWER iron batteries. All the chemicals contained in it can be decomposed and absorbed by the environment in a harmless way in nature, It can effectively solve environmental problems such as secondary recycling. Iron batteries have been tested for high temperature, high voltage, and impact, and their safety performance is very good. There is not a high chance of short circuit explosion. In terms of energy supplementation, the e6 can be slowly charged using a 220V civilian power supply, which is 3C charging. It can fully charge 80% of the battery in about 15 minutes