Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

BYD E6 New Energy introduce

The BYD E6 is a pure electric crossover independently developed by BYD, which is compatible with the design concepts of SUVs and MPVs. It is a high-performance crossover vehicle. Its driving range exceeds 300km, making it the top of its class. The biggest highlight of the E6 is its electric drive, and its power and starting batteries are both produced using independently developed ET-POWER iron batteries. All the chemicals contained in it can be decomposed and absorbed by the environment in a harmless way in nature, It can effectively solve environmental problems such as secondary recycling. Iron batteries have been tested for high temperature, high voltage, and impact, and their safety performance is very good. There is not a high chance of short circuit explosion. In terms of energy supplementation, the e6 can be slowly charged using a 220V civilian power supply, which is 3C charging. It can fully charge 80% of the battery in about 15 minutes