Engine computer wiring harness introduce

The most headache inducing issue in repairing high-end cars is the computer. When repair personnel encounter a computer malfunction, they dare not conclude that it is a problem with the computer. 1. The main function of the engine ECU is to adjust the engine's operation through the execution structure. In terms of use, it is a specialized microcomputer controller for cars, which controls many components on the car ECU stands for Electronic Control Unit ECU can be said to be the brain of the engine. Without it, the engine cannot operate normally. ECU's main function is to adjust the engine's operation through the execution structure. 2. There are many sensors near the engine of a car, and their function is to transmit data back to ECU. After processing by ECU, corresponding mechanisms can be executed to adjust the engine's normal operation. ECU is generally located in the engine compartment, so it can be said that there is no ECU, The engine cannot be used. If there is damage to the sensors near the engine, it can also affect the operation of the engine. 3. The sensors around the engine include the air influenza sensor, intake temperature sensor, etc. It can be said that basically all the sensors of the vehicle are gathered here. If the sensors are damaged, the ECU cannot collect important information about the car, and cannot accurately adjust the engine operation)

Internal maintenance of engine wiring harness

The engine wiring harness is generally composed of multiple strands of copper flexible wires inside and wrapped in plastic on the outside. The engine is like a person's heart, and the wiring harness can be called a person's veins. If the veins are not smooth, it can damage health and even cause diseases. Similarly, poor wiring will affect the engine's performance. Regular wiring harness maintenance: Wiring harness maintenance usually uses wiring harness protective agents, which work by forming a protective film on the surface of the engine wire/battery joint, Isolate moisture and avoid oxidation. Due to the high pressure resistance and insulation characteristics of the spray, it can also delay the aging and cracking of rubber and plastic fittings in the cabin, prevent electrical leakage caused by aging of the wiring harness. In addition, the protective film sprayed is not easy to get dirty and easy to wipe, which can keep the cabin clean for a long time

BYD E6 New Energy introduce

The BYD E6 is a pure electric crossover independently developed by BYD, which is compatible with the design concepts of SUVs and MPVs. It is a high-performance crossover vehicle. Its driving range exceeds 300km, making it the top of its class. The biggest highlight of the E6 is its electric drive, and its power and starting batteries are both produced using independently developed ET-POWER iron batteries. All the chemicals contained in it can be decomposed and absorbed by the environment in a harmless way in nature, It can effectively solve environmental problems such as secondary recycling. Iron batteries have been tested for high temperature, high voltage, and impact, and their safety performance is very good. There is not a high chance of short circuit explosion. In terms of energy supplementation, the e6 can be slowly charged using a 220V civilian power supply, which is 3C charging. It can fully charge 80% of the battery in about 15 minutes