The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
Compared to some autonomous pure electric vehicles with an ultra long range of 500-600 kilometers, the Ford Lingjie EV's 360 kilometer range is not particularly outstanding. In terms of battery configuration, the Ford Lingjie EV adopts a 622 battery pack with excellent thermal stability and cycle performance, as well as an excellent battery layout and bottom protection design. From this, it can be seen that Ford prioritizes safety and durability. As for how to make up for the problem of insufficient range, the Ford Lingjie EV has launched the "Big Butler" service package to solve the range problem with service
Copyright © 2021.Company name All rights reserved.