Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Great Wall Fengjun 6 introduce

The Great Wall Fengjun 6 was officially launched on April 16, 2014. The Fengjun 6 has a length/width/height of 5345/1800/1760mm, a wheelbase of 3200mm, a cargo box length/width/height of 1545/1460/480mm, a maximum cargo capacity of 950 kilograms, a minimum ground clearance of 188mm, an approach angle of 27 degrees, and a departure angle of 19 degrees. It adopts front and rear disc brakes, and a suspension structure of front double wishbone torsion bar spring independent suspension/rear steel plate spring non independent suspension. The minimum turning diameter of the most hydraulic power assisted steering is 14.5 meters