The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
The Great Wall Fengjun 6 was officially launched on April 16, 2014. The Fengjun 6 has a length/width/height of 5345/1800/1760mm, a wheelbase of 3200mm, a cargo box length/width/height of 1545/1460/480mm, a maximum cargo capacity of 950 kilograms, a minimum ground clearance of 188mm, an approach angle of 27 degrees, and a departure angle of 19 degrees. It adopts front and rear disc brakes, and a suspension structure of front double wishbone torsion bar spring independent suspension/rear steel plate spring non independent suspension. The minimum turning diameter of the most hydraulic power assisted steering is 14.5 meters
Copyright © 2021.Company name All rights reserved.