The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The Dongfeng Fengshen AX3 is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW/6000rpm and a maximum torque of 145N · m/4200rpm. In terms of appearance, the front face of the Dongfeng Fengshen AX3 still adopts a family style design, with fashionable front headlights. The front of the car adopts an X-shaped design, which has more tension and a three-dimensional layout of the front bumper, presenting a stronger sense of heaviness. In terms of the rear end, the new car's tail lights use LED light sources, and the rear windshield area is not too large, But the left and right sides extend to the side of the car, creating a more unique effect
Copyright © 2021.Company name All rights reserved.