tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Dongfeng Fengshen AX3 introduce

The Dongfeng Fengshen AX3 is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW/6000rpm and a maximum torque of 145N · m/4200rpm. In terms of appearance, the front face of the Dongfeng Fengshen AX3 still adopts a family style design, with fashionable front headlights. The front of the car adopts an X-shaped design, which has more tension and a three-dimensional layout of the front bumper, presenting a stronger sense of heaviness. In terms of the rear end, the new car's tail lights use LED light sources, and the rear windshield area is not too large, But the left and right sides extend to the side of the car, creating a more unique effect