Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Fukuda Kato IM8 introduce

The interior of the GATU IM8 may not be very fashionable at present, but the addition of suspended central control screens and imitation carbon fiber trim panels still shows us its youthful side. The 10.1-inch central control screen in the car is more eye-catching, but unfortunately, our test vehicle is not equipped with navigation function, but fortunately it supports mobile phone connectivity, This way, the mapping function can be used to better utilize this large screen. In terms of car interior configurations that consumers are generally concerned about, it is equipped with functions such as one click start, automatic air conditioning, electric sunroof, tire pressure monitoring, etc. However, functions such as body stability control, traction control, and brake assist are not equipped in the entire series, while models in the same price range are basically equipped with these functions and configurations, The GATU IM8 needs to be further improved. The clutch pedal stroke of the GATU IM8 is moderate, but the position of the engagement point is relatively low. It can be engaged by lifting it slightly, and it needs to be adapted at the beginning of use