Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Fukuda Kato IM8 introduce

The interior of the GATU IM8 may not be very fashionable at present, but the addition of suspended central control screens and imitation carbon fiber trim panels still shows us its youthful side. The 10.1-inch central control screen in the car is more eye-catching, but unfortunately, our test vehicle is not equipped with navigation function, but fortunately it supports mobile phone connectivity, This way, the mapping function can be used to better utilize this large screen. In terms of car interior configurations that consumers are generally concerned about, it is equipped with functions such as one click start, automatic air conditioning, electric sunroof, tire pressure monitoring, etc. However, functions such as body stability control, traction control, and brake assist are not equipped in the entire series, while models in the same price range are basically equipped with these functions and configurations, The GATU IM8 needs to be further improved. The clutch pedal stroke of the GATU IM8 is moderate, but the position of the engagement point is relatively low. It can be engaged by lifting it slightly, and it needs to be adapted at the beginning of use