On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
In terms of appearance, there is no obvious difference between the Tuyano EV and the fuel version Tuyano. The EV version still retains the air intake grille, with two iconic silver decorative strips in the middle. To distinguish whether this is a pure electric or fuel model on the front, you need to carefully look at the headlights of the car. There is a blue circle around the light group, which can be considered as the identity of the Tuyano EV. In terms of the cargo compartment, the floor of the Tuyano EV's cargo compartment is very flat, The length inside the car is 3.35 meters, width is 1.88 meters, and height is 1.67 meters. The maximum width when the car door is opened is 1.23 meters, and the platform is 65 centimeters above the ground. The Tuyano EV is equipped with a 79.92 kWh lithium manganese oxide battery from Mengguli, and the motor is a permanent magnet synchronous motor produced by Foton, with a peak power of 100 kW
Copyright © 2021.Company name All rights reserved.