Luggage compartment lid introduce

The luggage compartment lid requires good rigidity and is structurally similar to the engine hood, with both outer and inner panels and reinforced ribs on the inner panel. Some sedans, known as "two and a half", have their luggage compartment extending upwards, including the rear windshield, to increase the opening area and form a door. Therefore, it is also called a back door, which maintains the shape of a sedan and facilitates the storage of items. If a back door is used, the side of the inner panel of the back door should be embedded with rafter adhesive sealing strips, Surrounded by a circle to prevent water and dust, the support components for opening the luggage compartment lid are generally hook shaped hinges and four link hinges. The hinges are equipped with balance springs, which make opening and closing the luggage compartment lid effortless and can be automatically fixed in the open position for easy retrieval of items)

Installation and replacement process of luggage compartment lid/trunk lid

An assistant is required when disassembling and installing the luggage compartment lid. Wear gloves to protect your hands and prevent injury. 1) Separate the luggage compartment lid decorative panel fixture and remove the luggage compartment lid decorative panel. 2) Separate the luggage compartment rear wire and connector. 3) Unscrew the luggage compartment lid hinge fixing bolt and remove the luggage compartment lid. 4) Install a new luggage compartment lid in the opposite order of disassembly

Jaguar XFL introduce

The Jaguar XFL was launched in 2016. In terms of exterior design, the domestically produced Jaguar XFL is basically the same as the imported version, with only a significant increase in body length, but the extended wheelbase does not damage the original side profile. In terms of size, the length, width, and height of the Jaguar XFL are 5093/1880/1456mm respectively, with a wheelbase of 3100mm, an increase of 140mm compared to the imported Jaguar XFL. In terms of space, the rear knee space of the domestically produced XFL has increased by 116mm, reaching 203mm, Legroom increased by 157 mm. In terms of power, the Jaguar XFL will be equipped with a 2.0T engine, available in 200Ps and 240Ps high and low power versions, with a 0-100 km/h time of 8.1 seconds and 7.4 seconds respectively. In addition, the new car will also offer a 3.0T V6 turbocharged engine version, with a maximum power of 340 Ps and a 0-100 km/h time of 6.0 seconds