crossmember introduce

Yuanbaoliang, the concept of "subframe", is a new term often used in car books. This component is not only found in Volkswagen cars, but also in other car models. The subframe is not a complete frame, but only a bracket that supports the front and rear axles and suspension, connecting the axles and suspension to the "main frame" through it, commonly known as the "subframe". The function of the subframe is to block vibration and noise, reduce their direct entry into the car compartment, so it is mostly found in luxury sedans and off-road vehicles. Some cars even install subframes for engines)

Yuanbaoliang/subframe installation

1: Two horns of the gearbox: 2. Return oil pipe and oil pipe of the steering gear. 3. Half shaft and balance rod. Direction rod. 4. Connection of the steering intermediate shaft to the steering gear. 5. Installation of four fixing screws for the Yuanbao beam. 1. Fixation of four screws and intermediate shaft. 2. Two oil pipes. 3. Horn, half shafts and pull rods on both sides

Jaguar XFL introduce

The Jaguar XFL was launched in 2016. In terms of exterior design, the domestically produced Jaguar XFL is basically the same as the imported version, with only a significant increase in body length, but the extended wheelbase does not damage the original side profile. In terms of size, the length, width, and height of the Jaguar XFL are 5093/1880/1456mm respectively, with a wheelbase of 3100mm, an increase of 140mm compared to the imported Jaguar XFL. In terms of space, the rear knee space of the domestically produced XFL has increased by 116mm, reaching 203mm, Legroom increased by 157 mm. In terms of power, the Jaguar XFL will be equipped with a 2.0T engine, available in 200Ps and 240Ps high and low power versions, with a 0-100 km/h time of 8.1 seconds and 7.4 seconds respectively. In addition, the new car will also offer a 3.0T V6 turbocharged engine version, with a maximum power of 340 Ps and a 0-100 km/h time of 6.0 seconds