ABS, translated as "anti lock braking system" in Chinese, is one of the three great inventions in the history of automotive safety, along with airbags and seat belts. It is a car safety control system with advantages such as anti slip and anti lock ABS is an improved technology based on conventional braking devices, which can be divided into mechanical and electronic types. Modern cars are extensively equipped with anti lock braking systems. ABS not only has the braking function of ordinary braking systems, but also prevents wheel lock up, allowing the car to still turn in the braking state, ensuring the stability of the car's braking direction, and preventing sideslip and deviation. It is currently the most advanced and most effective braking device in cars)
1. First, disconnect the negative wire harness. 2. Then pull up the locking pin of the ABS pump plug, and separate the plug. 3. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 4 brake lines from the ABS pump. 4. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 2 brake lines below from the ABS pump. 5. Separate the two plugs above the engine compartment. 6. Use a tool to remove the fixing screw of the ABS pump bracket
As is well known, before a car model is officially launched on the market, it usually undergoes trials under three extreme conditions: high temperature, high cold, and high altitude. However, for consumers, the purchased vehicles are all mass-produced with high randomness, so such trials are deliberate. Especially for high-end models like the Cheetah Matu, consumers have very strict standards for their "hardware" facilities, The trial run of the experimental vehicle has little reference significance, and the performance after actual mass production is more convincing
Copyright © 2021.Company name All rights reserved.