On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
As is well known, before a car model is officially launched on the market, it usually undergoes trials under three extreme conditions: high temperature, high cold, and high altitude. However, for consumers, the purchased vehicles are all mass-produced with high randomness, so such trials are deliberate. Especially for high-end models like the Cheetah Matu, consumers have very strict standards for their "hardware" facilities, The trial run of the experimental vehicle has little reference significance, and the performance after actual mass production is more convincing
Copyright © 2021.Company name All rights reserved.