Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Nissan Tunda, as the world's first model, also made its global debut this time. It is produced by Zhengzhou Nissan and can be sold through both Dongfeng Nissan and Zhengzhou Nissan channels. This behavior is very rare in China. Thinking of Volkswagen, Toyota, Honda in Wuhan, and Guangzhou, this situation has not occurred. Therefore, in the Nissan system, the two manufacturers in the north and south have set a precedent in the industry in terms of harmony. As is well known, Under the Dongfeng Nissan system, all SUVs - Loulan, Qijun, Xiaoke, and Jinke - belong to urban SUVs, which can help users obtain a higher test drive view and better passability compared to sedans. However, the CVT gearbox seems to make the power output of the entire series appear too "obedient"
Copyright © 2021.Company name All rights reserved.