Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Dongfeng Xiaokang K05S introduce

In terms of exterior design, the new K05S is still very fashionable. Although it has similar shapes, its body proportion and exquisite shape look very pleasing. Especially in the front face, it is equipped with a fog light group as standard, which not only makes the whole car look more fashionable than boutique models such as Wuling Light, but also plays a good auxiliary lighting role. As for the interior, there is really nothing to see about this type of car, The entire interior is made of hard plastic, and the center console is equipped with a multimedia nose, without even displaying the time; This needs post processing. It costs about 600 or 700 yuan to add an ordinary central control screen and a recorder outside the auto parts city. Then his internal storage compartment is relatively small, and the co pilot's seat can't be adjusted back and forth. The comfort is really average. The main thing is that he doesn't have a tachometer and power steering, which is really inconvenient. The power steering is about 1500 yuan later