The car engine computer is the core part of electronic controlled cars nowadays, and its functions can be simply put as two: 1. receiving signals from various sensors and calculating corresponding data; 2. Control the fuel injection, ignition, and idle intake of the car engine based on the calculated data to ensure the normal operation of the engine and minimize engine emission pollution. 3. If the engine computer board is damaged, the following situations may occur: 1. The engine malfunction light is on, but then catches fire and the vehicle shakes; 2. The car is difficult to start, with no ignition or fuel injection, and internal program disorder. There are many symptoms of the engine computer board being broken, with minor ones being the engine malfunction light coming on and then catching fire. The vehicle shakes, making it difficult to start. In severe cases, the vehicle may be unable to start, with no ignition or fuel injection, and internal program disorder)
1. Use a T20 screwdriver to disassemble the screen and a 10mm hexagonal socket to disassemble the brake light. 2. Use a plastic pry bar to disassemble the panel, pry the pry bar firmly to loosen it, and unscrew the four screws of the host using t20. 3. Use t20 to unscrew the four screws around the host and pull them out, connecting three wires to the back. 4. Use a 10mm socket to disassemble three reversing lights, and the power of the rear camera is also connected to the black negative wire and the white green positive wire of this light
The Dongfeng Fengdu MX6 is the first SUV of the Zhengzhou Nissan Dongfeng Fengdu brand. It is a professional urban SUV originating from NISSAN, inheriting the rugged lines of an SUV in appearance, and has been upgraded and optimized on the basis of the original configuration. The Dongfeng Fengdu MX6 continues the body of the old Qijun, with a square and sturdy side body that leaves a deep impression. In addition, the MX6 also continues the panoramic sunroof design of the old Qijun, It is expected that there will be many similarities between the interior design and configuration of the car and the old Qijun. According to previous declaration information, the length, width, and height dimensions of the car are 4625/1790/1735mm, and the wheelbase is 2630mm. In terms of power, the MX6 is expected to carry a 2.0L naturally aspirated engine with the code name MR20, with a maximum power of 106kW (144PS) and an optional 6MT and CVT transmission
Copyright © 2021.Company name All rights reserved.