The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
From the perspective of the Mercedes Benz E260L model, the entire series has been equipped with a 2.0-liter low-power version engine and a 48V mild hybrid system, with a maximum engine power of 145 kW and a peak torque of 320 Nm; The previously available E260L is equipped with a 1.5-liter+48V mild hybrid system engine with a maximum power of 135 kW and a peak torque of 280 Nm. From the data, it can be seen that the new E260L equipped with a 2.0-liter engine+48V mild hybrid system performs better in terms of power parameters. Therefore, when driving normally, the new model will not experience the same situation of roaring and not leaving as the old model
Copyright © 2021.Company name All rights reserved.