Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

BMW 328Li introduce

The BMW 328Li has no significant configuration differences in the front part of the car. The hood extends in a wedge-shaped shape from the upper edge of the headlights to the lower edge of the front windshield, and the multi edged design makes the new hood look more dynamic. The enlarged front grille is a prominent feature of this generation of 3 Series, and the new headlight group closely connected to the grille is more aggressive. The chrome plated decorative strip in the fog light area, which is unique to the new 3 Series, is firmly covered by black tape, But the overall lines are clearly exposed. The side of the BMW 328Li can be clearly seen to be different from the overseas version of the 3 Series. The size of the rear door has a more obvious increase, and the line at the back of the side skirt tends to be more straight. This also means that it will be an authentic domestic new 3 Series sedan, which will provide more abundant rear seating space for Chinese consumers. The BMW 328Li will be equipped with a brand new 4-cylinder turbocharged engine, The maximum power is 240 horsepower, matched with a brand new 8-speed automatic transmission. The first six gears of the new transmission adopt a 1:1 gear ratio, and the last two gears are super ratio gears, which can help reduce fuel consumption during high-speed cruising