front fender introduce

The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)

Front fender replacement tutorial:

Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining

BMW 328Li introduce

The BMW 328Li has no significant configuration differences in the front part of the car. The hood extends in a wedge-shaped shape from the upper edge of the headlights to the lower edge of the front windshield, and the multi edged design makes the new hood look more dynamic. The enlarged front grille is a prominent feature of this generation of 3 Series, and the new headlight group closely connected to the grille is more aggressive. The chrome plated decorative strip in the fog light area, which is unique to the new 3 Series, is firmly covered by black tape, But the overall lines are clearly exposed. The side of the BMW 328Li can be clearly seen to be different from the overseas version of the 3 Series. The size of the rear door has a more obvious increase, and the line at the back of the side skirt tends to be more straight. This also means that it will be an authentic domestic new 3 Series sedan, which will provide more abundant rear seating space for Chinese consumers. The BMW 328Li will be equipped with a brand new 4-cylinder turbocharged engine, The maximum power is 240 horsepower, matched with a brand new 8-speed automatic transmission. The first six gears of the new transmission adopt a 1:1 gear ratio, and the last two gears are super ratio gears, which can help reduce fuel consumption during high-speed cruising