Transmission valve body introduce

Transmission valve body: Introduction to the transmission valve body: 1. The transmission valve body can be used for shifting between high and low gears. When the vehicle speed reaches a certain gear, hydraulic oil pushes the valve body to automatically shift the gear to that gear. The automatic transmission can automatically change the transmission ratio according to the engine load and speed, so that the car can achieve good power and fuel economy, and reduce engine emissions pollution. 2. The automatic transmission is easy to operate, When vehicles are congested, it can greatly improve the safety and reliability of vehicle operation. Electronic controlled automatic transmissions are usually composed of five parts: hydraulic torque converter, planetary gear transmission system, shift actuator, hydraulic control system, and electronic control system)

Symptoms of Damaged Transmission Valve Body

The function of the gearbox valve body is to drive the gearbox to shift high and low. The gearbox valve body controls various shifting mechanisms by converting the oil circuits inside the valve body. Of course, there may be damage to components on the vehicle, such as the gearbox valve body. The reasons for damage may include the following: 1. Insufficient internal pressure caused by structural damage or insufficient sealing inside the valve body, resulting in difficulty in separating or combining shifting actions; 2. The electromagnetic valve or mechanical part inside the valve body is damaged, causing the original function to not function properly; 3. If the oil in the valve body is used for too long and there are too many impurities in the oil, it will cause the valve body to operate slowly. If the time is too long, it will exacerbate the wear of the valve body. Symptoms of a damaged transmission valve body: 1. Impact sensation during upshifting and downshifting, and obvious jerking during shifting; 2. There is a strong jerking sensation when shifting gears, and the shifting motion is not smooth, etc; 3. The gearbox makes abnormal noises while driving; 4. The instrument panel displays a transmission fault light

BMW 328Li introduce

The BMW 328Li has no significant configuration differences in the front part of the car. The hood extends in a wedge-shaped shape from the upper edge of the headlights to the lower edge of the front windshield, and the multi edged design makes the new hood look more dynamic. The enlarged front grille is a prominent feature of this generation of 3 Series, and the new headlight group closely connected to the grille is more aggressive. The chrome plated decorative strip in the fog light area, which is unique to the new 3 Series, is firmly covered by black tape, But the overall lines are clearly exposed. The side of the BMW 328Li can be clearly seen to be different from the overseas version of the 3 Series. The size of the rear door has a more obvious increase, and the line at the back of the side skirt tends to be more straight. This also means that it will be an authentic domestic new 3 Series sedan, which will provide more abundant rear seating space for Chinese consumers. The BMW 328Li will be equipped with a brand new 4-cylinder turbocharged engine, The maximum power is 240 horsepower, matched with a brand new 8-speed automatic transmission. The first six gears of the new transmission adopt a 1:1 gear ratio, and the last two gears are super ratio gears, which can help reduce fuel consumption during high-speed cruising